12V Solar Charge Controller, Solenoid, 12 Volt, Made in USA

  • Sale
  • Regular price $53.97


Cutting Edge Power

12 Volt 300 Amp Solar Panel Charge Controller

Designed and built in America 

DESIGN FEATURES: 

  • 12VDC 150A continuous / 300 Amp in rush current rating.
  • Display shows current battery voltage in addition to any other user changeable settings.
  • Protects your battery from being overcharged by disconnecting your solar panels.
  • Components are mounted on a 3/16" non-conductive plate and pre-wired.
This charge controller has multiple user adjustable settings including Disconnect voltage level and Cut in voltage level.
 
All control electronics are isolated from high current loads.
 
The charge controller uses a high current mechanical solenoid relay that can handle high voltage surges unlike solid state controllers.  A solid state controller is not suitable at all for wind turbines, they will burn out in high wind. 

 

The non-conductive plate is made in America and designed specifically for this controller.  The mounting holes are 1/4" dia.  Measures 5" high x 5-1/2" wide.

The charge controller operates on 12VDC, but it can be used to control a 24 or 48 volt battery bank if only one battery is sampled.  This configuration is not recommended, but it will work if needed.

SPECIFICATIONS: 

  • BATTERY VOLTAGE REQUIREMENT: 12VDC (see note above regarding 24 and 48 volt battery banks)
  • MAXIMUM CURRENT RATING: 150A CONTINUOUS / 300A SURGE
  • DIMENSIONS: 5"H X 5.5"W X 3.25" THK
  • WEIGHT: 1.3 LBS
  • MANUFACTURE LOCATION: HOUSTON, TEXAS, USA