Don’t waste your solar panels with an off-grid system!

Cutting Edge Power's simple solution for today's solar power generation.

How does it work?

Connect your batteries and solar panels (not included). Then plug the grid-tie outputs into your 110/120V wall outlet. Your work is done here. Everything else is autonomous!
The hybrid solar generator’s first priority is charging your batteries. It will only charge until the batteries reach maximum voltage (Typ 13.0V, adjustable).
Once the batteries are full, all extra power will be sent back to the grid.
The battery charge voltage will be maintained and ready to go.
If/When you lose the grid connection, the on-grid inverter will be turned off, and the off-grid inverter can be used.

Features:

Don’t waste your solar panels with an off-grid system:
- Have power storage for emergencies, camping, tailgating, etc AND have the ability to send power back to the grid when you’re at home.
Plug and Play, no splicing, crimping, or soldering required.
- Standard USA 3 prong wall outlet connector
- 5/16” battery ring terminal connectors
Perfect for on-grid or off-grid use at home, industrial use, commercial use, tailgating, camping, emergency power outages, etc.
Premium components like 200°C silicone insulated wire, efficient MPPT charge controller, pure sine inverters and rugged enclosure.
Built-in short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection.
Assembled in USA with technical support in USA.

Terms used in this listing:

Grid: When we refer to the grid, we are referring to the transmission system for electricity in America. Specifically, residential/commercial 120VAC/1PH/60HZ connections. This product includes a pure sine 48-62HZ grid tie inverter. It may work in other countries such as Canada, Mexico, South America, and Europe, but it has not been tested in these regions.

Cutting Edge Power does not make any claims or guarantees regarding power sent back to the grid or a reduced electric bill. Sending power back to the grid is different with every electric provider. In most cases, the relatively small amount of power “sent back” to the grid will in fact be consumed within the same residence, thus, never actually be sent to the grid. Meaning, your electric bill should go down. If you intend to sell power back to your electric provider, you must contact them as there are many rules and regulations and Cutting Edge Power cannot be responsible for knowing all the regulations in every jurisdiction.

Specifications

Battery chemistry compatibility:	Deep Cycle Lead Acid Flooded Lead Acid Sealed Lead Acid (SLA) Absorbed Glass Mat (AGM) Gel Lithium Lithium Iron Phosphate (LiFePO4) 3S Cutting Edge Power lithium 7S Cutting Edge Power lithium (A 12V automotive starting battery will function, but run times will not be ideal)
Maximum Cutting Edge Power lithium batteries that can fit inside:	6,000Wh
Solar charge controller technology:	MPPT
Maximum solar panel input open circuit voltage (VOC rating on your solar panel label):	100V DC
Maximum off-grid battery charging solar panel input power: (Let us know if you need more solar input capacity)	600W @ 12V 1,200W @ 24V
Solar charge controller power consumption at idle:	1.0W
Max Off-grid inverter output:	2000W continuous / 4,000W surge Pure sine wave
Max Grid-tie inverter output:	2,000W (1,000W x 2, 8.3A each) Pure sine wave
Input ports:	(2) Solar panel connector pair (1) 12V/24V Pair input/output 3/8” post terminals for connecting external batteries, optional wall charger, or devices
Output ports: External dimensions:	(1) 12V socket, 30A (360W max output) (1) 12V/24V Pair input/output 3/8” post terminals for connecting external batteries or devices (3) 3-prong 15A 110/120V household sockets (off-grid, use when the grid is down) (3) 3-prong 15A 110/120V household plugs (grid-tie, plug into your home's wall socket) (1) USB-C PD & (1) USB-A QC 3.0
Output port technology:	(1) USB-C PD & (1) USB-A QC 3.0: 18W Max. Output Power (5V@3.4A, 9V@2A, 12V@1.5A) Supports DCP (BC1.2, Apple, Samsung) Supports Qualcomm Quick Charge Protocol QC2.0 and QC3.0 Supports Samsung Fast Charge Protocol AFC
Temperature range:	-4°F~131°F (-20°C~55°C)
Inside dimensions:	Enclosure internal dimensions: 20.5" L x 12.375" W x 9.5" H Enclosure external dimensions: 25" L x 18" W x 19" H
Weight:	51 lbs
Warranty:	Complete solar generator: 5 years Solar charge controller: 5 years Lithium Battery (If equipped): 5 years
Grid power voltage requirement:	Standard North American 90-140VAC (Typ 110-125 VAC), automatically detected
Grid power frequency requirement:	Standard North American 48-62Hz, automatically detected

Downloads

Installation and Operation manual