Don’t waste your solar panels with an off-grid system!
Cutting Edge Power's simple solution for today's solar power generation.
How does it work?
- Connect your battery and solar panels (not included). Then plug the battery box into your 110/120V wall outlet. Your work is done here. Everything else is autonomous!
- The hybrid battery box’s first priority is charging your battery. It will only charge until the battery reaches maximum voltage (Typ 13.0V, adjustable).
- Once the battery is full, all extra power will be sent back to the grid.
- The battery charge voltage will be maintained and ready to go.
- If/When you lose the grid connection, the on-grid inverter will be turned off, and the off-grid inverter can be used.
Don’t waste your solar panels with an off-grid system:
- Have power storage for emergencies, camping, tailgating, etc AND have the ability to send power back to the grid when you’re at home.
- Plug and Play, no splicing, crimping, or soldering required.
- 3 prong wall outlet connector
- 5/16” battery ring terminal connectors
- Perfect for on-grid or off-grid use at home, industrial use, commercial use, tailgating, camping, emergency power outages, etc.
- Premium components like 200°C silicone insulated wire, efficient charge controller, and rugged enclosure.
- Built-in short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection.
- Assembled in USA with technical support in USA.
Maximum on-grid power output: 2000W @ 120VAC
- Plug into wall outlet
- Dual 1000W grid tie pure sine wave inverters (8.3A each x 2, 120VAC back to the grid!)
Maximum off-grid power output: 2000W @ 120VAC
- (2) 3 prong outlets
- (4) smart USB ports (0-2.4A)
- Single 2000W continuous / 4000W max surge Pure sine wave inverter
Solar panel input power: 120W minimum
Solar panel input voltage range: 55V VOC
Battery nominal voltage: See options
Battery requirement: Deep Cycle Lead Acid, AGM, GEL, Lithium 3S, Lithium LiFePO4
Maximum solar input (charge controller): 60A DC (1100W @ 12V / 2200W @ 24V) [ Optional upgrades available - drop downs when adding to cart ]
Working temperature: 32°F to 122°F (0°C to 50°C)
Grid power voltage requirement: 90-140VAC (Typ 110-125 VAC), automatically detected
Grid power frequency requirement: Typical 48-62Hz, automatically detected
Terms used in this listing:
Grid: When we refer to the grid, we are referring to the transmission system for electricity in America. Specifically, residential/commercial 120VAC/1PH/60HZ connections. This product includes a pure sine 48-62HZ grid tie inverter. It may work in other countries such as Canada, Mexico, South America, and Europe, but it has not been tested in these regions.
Cutting Edge Power does not make any claims or guarantees regarding power sent back to the grid or a reduced electric bill. Sending power back to the grid is different with every electric provider. In most cases, the relatively small amount of power “sent back” to the grid will in fact be consumed within the same residence, thus, never actually be sent to the grid. Meaning, your electric bill should go down. If you intend to sell power back to your electric provider, you must contact them as there are many rules and regulations and Cutting Edge Power cannot be responsible for knowing all the regulations in every jurisdiction.
- (3) Household 110/120VAC / 1PH / 60 HZ 3-prong outlet, pure sine
- Maximum continuous power output: 2,000W
- Maximum surge power output: 4,000W
- (3) USB 5VDC / 2A
- (1) 12V socket, 30A (360W max output)
- Grid Tie connection: 3 prong (plugs into standard 3 prong outlet)
- (2) Solar panel connector pair
- Enclosure internal dimensions: 20.5" L x 12.375" W x 9.5" H
- Enclosure external dimensions: 25" L x 18" W x 19" H