Innovative wiring solutions to make your installation quick and reliable.
Here are the amazing pictures and videos that people share with us
"I have not installed yet, but I'm impressed by the quality of the Entry Gland. I love that it has the MC4 connectors built directly into the box, which I hadn't seen before. I needed the 4 ports to max out the capabilities of my Goal Zero Yeti 3000, which has two separate charge controllers - one with a 360w/22v Max (PWM) and the other with 325w/24v Max (MPPT) input. I've got 2 x 180w panels in parallel going to one of the connectors via a 2 to 1 MC4 adapter and a single 200w panel going into the other connector. Excited to get it all setup!"
"Super straightforward. My controller called for eye bolts, so switched 3/8ths out with the factory connectors/plugs, hooked it up & down worked beautifully. I currently use the 2' for our tt as an inlet for the 'mobile' solar panel & I will be purchasing the 5' for the 2 panels going on our roof."
"This was a perfect item to stick on the top of my solar junction box to connect an extra set of parallel panels. Easy to integrate but remember to confirm that the WAGO connectors are rated to handle the amperage you intend to put through this; in my case it didn't so I just removed them and attached to my bus bar directly. I did apply a caulk seal around the outside to weather seal this and I had to drill screw holes since this does not have any."
"Installed on my travel trailer today. It will be a nice addition to my solar setup."
"Product shipped quickly, looks like it will work out good. Have not installed yet. Was a little expensive but the only one on the market that I could find."
- Ryan M.
This video was taken for one of our customers in Hawaii