Wind Turbine Flange to Pipe Adapter for Import Turbines, NO WELDING, Made in USA
This adapter was designed to mount small import wind turbines to a standard 1-1/2" or 2" steel pipe. It simplifies your wind turbine installation.
Specifications:
- Dimensions in photos
- The Inside Diameter (I.D.) of this product is:
- 2.067" I.D. to fit a 1-1/2" pipe
- 2.469" I.D. to fit a 2" pipe
Standard Pipe - Schedule 40
| PIPE SIZE | OD | WALL THICKNESS | ID |
| 1/8 | .405 | .068 | .269 |
| 1/4 | .540 | .088 | .364 |
| 3/8 | .675 | .091 | .493 |
| 1/2 | .840 | .109 | .622 |
| 3/4 | 1.050 | .113 | .864 |
| 1 | 1.315 | .133 | 1.049 |
| 1 1/4 | 1.660 | .140 | 1.380 |
| 1 1/2 | 1.900 | .145 | 1.610 |
| 2 | 2.375 | .154 | 2.067 |
| 2 1/2 | 2.875 | .203 |
2.469 |
| 3 |
3.500 | .216 | 3.068 |
| 3 1/2 | 4.000 | .226 | 3.548 |
| 4 | 4.500 | .237 | 4.026 |
| 4 1/2 | 5.000 | .247 | 4.506 |
| 5 | 5.563 | .258 | 5.047 |
| 6 | 6.625 | .280 | 6.065 |
| 7 | 7.625 | .301 | 7.023 |
| 8 | 8.625 | .322 | 7.981 |
| 10 |
10.75 | .365 | 10.02 |
| 12 | 12.75 | .406 | 11.94 |
- Welded in USA
- Material: Carbon steel
- Hollow throughout, so wiring can pass through
- Coated with a heavy duty textured black paint
Also Available:
Customer Reviews
4.5
Based on 11 Reviews
Write a Review
Filter Reviews:
PH
06/18/2021
Philip H.
United StatesA bit expensive
Did not use it yet. But, It is a solid piece . Good welds. I would have not bought it, if I didn't really need it for my turbine.
JH
06/18/2021
Josh H.
United StatesDoes the job
its definitely a little spendy for what your getting. Had to paint it on the inside so it won't rust. Other then that it works well
PH
04/02/2021
Philip H.
United StatesGood product, good service.
Good product, good service.
HN
09/09/2020
herminio n.
United StatesGood quality item
Took longer then promised but it looks like a good quality put together item
BB
07/09/2020
Bruce B. .
United Stateworks great
It fit my pipe perfect and the ****** on my wind generator perfect. I have no problems with it